Quality

AS9100D

Health & Safety

ISO 45001

Environmental

ISO 14001

+44 (0) 1424 205140

12434 Waveguide Dehydrator

Designed to meet the universal increase in demand for aerial and waveguide pressurisation, the 12434 Waveguide Dehydrator uses tried and tested components to combine high capacity air generation with low-pressure delivery. The unit is very compact and is intended to be either floor or wall mounting. Installation is intended to assist those who wish to increase space, and reduce vibration within their 19” racks.

12434 Waveguide Dehydrator Brochure

Description

The 12434 Waveguide Dehydrator generates dry air using the same 1/3HP compressor as is used in the 12437, and 12377, and uses the standard twin drying bed method of dehydration. The dry air is stored within the units’ integral receiver between 40 and 60 psi. All electric and pneumatic connections are made via the top of the units 1/4” captive seal nuts and blanking caps ensure that the unit is ready for immediate attachment to up to three 1/4” aerial feeders.

As with all the Drallim Waveguide Dehydrators, the 12434 comes complete with humidity detection equipment, and a valve to dump wet air to atmosphere in an alarm condition. Alarms can be monitored visually, using the units’ panel mounted indicators, or remotely via the external alarm terminal. The alarm equipment monitors all aspects of potential aerial pressure failure, which include high humidity, low pressure, and mains failure.

Uses twin tower molecular sieve, adsorption system.

 

Additional information

Weight 30 kg
Dimensions 200 × 320 × 820 mm
Dry air delivery

35 ft³/hr

Output pressure

0.5 – 7 psi

Dry air dewpoint

-35ºC

Operating voltage

230v AC

No. of outlets

3

Product Enquiry

Please contact our sales for the product information. E-mail : [email protected]