Description
The PFT AC Dielectric Test Set Series are AC portable field use hipots. These hipots provide continuously adjustable AC voltage typically used to provide a pass/fail, AC over-voltage withstand test on high voltage apparatus, like switchgear, circuit breakers, reclosers, vacuum bottles, hot sticks, motor windings, bus duct, and any other equipment needing an AC voltage proof test. The PFT Series offers the most field portable, affordable, and easiest to use AC testers at this voltage and power. Higher kVA AC test sets and others designed for motor & generator testing are also available.
- CE Marked. Designed specifically to meet CE directives
- Continuously adjustable output voltage
- Fixed overload, factory set to 120% of variable transformer rated output current
- Zero start and external interlock provision
- Secondary connected dual-range voltmeter
- Three-range current meter with guard/ground return circuit
- Transit protected meters prevent meter damage between test sites
Input: | 120V, 60Hz, 16A or 230V, 50/60Hz, 8A |
Output: | 0 – 65kVac, 30mA, 2kVA capacitive load |
Duty: | 2kVA: 1 hr on, 1 hour off; 1.5kVA continuous |
Voltmeter: | 3.5″, scaled 0-32.5/65kVac, ±2% FS accuracy |
Currentmeter: | 3.5″, scaled 0-1mAac, ±2% FS with multipliers x1, x10, x100 |
Guard/ground load return: | Yes |
Controls | |
---|---|
Voltage output: | Continuously adjustable up to max. voltage |
Safety | |
Interlocks: | Zero start and external interface |
Protection: | Surge and transient |
Cable Length | |
---|---|
Output cable: | 1 off, not insulated for HV so must be isolated from ground |
Test leads for grounding: | 2 off |
Interconnect cable: | 1 off |
Guadred return: | RG/58U coax cable |
Size & Weight | |
Controls: | 533mm w x 286mm d x 387mm h, 24kg |
HV Tank: | 305mm w x 330mm d x 343mm h, 23kg |