VLF-65E VERY LOW FREQUENCY TEST SET VLF AC HIPOT 0 – 65 kV @ 10 µF

Description

VLF and DC output
Sheath testing
Cable fault burning
No PC required for VLF withstand and TD testing
VLF and TD communicate wirelessly — program TD test from VLF
Test data records to internal VLF memory and USB stick
Remote control of VLF and TD with E-Link PC application and XBee wireless
- Higher connection sustainability — more dependable
- No short distance limitations — test from further away
- Stay warm and dry in your truck while testing
- Works in more signal-sensitive locations
Advanced data capture and reporting capabilities
- Continuous rolling average of TD results and standard deviation
- 6 test results display at once for comparative analysis
- Use built-in templates or create your own
- Multiple fields for writing test descriptions
- 12 VLF & TD reporting routines

Input:	100Vac – 265Vac, 50Hz/60Hz, 20A max
Output:	0-65kVac peak, 26mA, 0.1Hz to 0.01Hz in steps of 0.01Hz sinusoidal ± 65kVdc, 45mA Square wave: 65kV Sheath Tester, 45mA
Duty:	Continuous
Load Rating:	1.0μF @ 0.10Hz, 2.0μF @ 0.05Hz, 5.0μF @ 0.02Hz, 10.0μF @ 0.01Hz

Voltage measurement:	Voltage kV peak or rms, ±1% FS accuracy
Current measurement:	Current mA peak or rms, ±1% accuracy
Capacitance measurement:	Res: 0.001μF, load 50µA-0.5mA 10% or 0.01µF acc., >0.5mA 5% or 0.01µF acc.
Resistance measurement:	Res: 0.1MΩ, load 50µA-0.5mA 10% or 5MΩ acc., >0.5mA 5% or 1MΩ acc.
Calculated:	Capacitance, resistance, flashover voltage, time to failure
Reports:	Test Records stored in non-volatile memory or via USB memory stick
Optional:	Tan Delta and Partial Discharge diagnostic equipment available

PC Interface:	USB and XBee wireless
PC Software:	Remote Control & Test Data Reporting
Fault:	Up to 50 test records can be stored in non-volatile memory or removable USB memory stick

Cable Lengths
Output cable:	6m flexible x-ray
Ground cable:	2 off 6m
Accessories:	Test leads, ground hook, line cord etc.
Size & Weight & Physical Attributes
Overall:	559mm w x 369mm d x 660mm h, 68kg

Weight	68 kg
Dimensions	559 × 369 × 660 mm
Input	100Vac – 265Vac, 50Hz/60Hz, 20A max
Output	± 65kVdc, 45mA, 0-65kVac peak, 26mA, 0.1Hz to 0.01Hz in steps of 0.01Hz sinusoidal, Square wave: 65kV Sheath Tester, 45mA
Duty	Continuous
Load Rating	1.0μF @ 0.10Hz, 10.0μF @ 0.01Hz, 2.0μF @ 0.05Hz, 5.0μF @ 0.02Hz
Voltage measurement	Voltage kV peak or rms, ±1% FS accuracy
Current measurement	Current mA peak or rms, ±1% accuracy
Capacitance measurement	Res: 0.001μF, load 50µA-0.5mA 10% or 0.01µF acc., >0.5mA 5% or 0.01µF acc.
Resistance measurement	Res: 0.1MΩ, load 50µA-0.5mA 10% or 5MΩ acc., >0.5mA 5% or 1MΩ acc.
Calculated	Capacitance, flashover voltage, resistance, time to failure
Reports	Test records stored in non-volatile memory or via USB memory stick
Optional	Tan Delta and Partial Discharge diagnostic equipment available
PC interface	USB, XBee® wireless
PC software	Remote control & test reports
Fault	Up to 50 test records can be stored in non-volatile memory or removable USB memory stick
Cable Length - Output cable	6m flexible x-ray
Cable Length - Ground cable	2 off 6m
Cable Length - Accessories	ground hook, line cord etc., Test leads