Description
The HVI Combination 2 in 1 DC Tester Series are high voltage DC proof testers and HV Megohmmeters. Testing for dielectric strength and insulation resistance is now served with one instrument, saving money, size and weight. The PTS series is designed and constructed with field use in mind. It is rugged, reliable and contains the features needed for electrical maintenance testing of new or installed electrical apparatus.
- Continuously adjustable output voltage
- Fixed overload, factory set to 120% of rated output current
- Zero start and external interlock provision
- Dual-range voltmeter
- Five-range current meter 0-1.0 μA DC with x1, x10, x100, x1k, and x10k multipliers
- Five-range megohmmeter 100-1 MΩ with x0.1, x1, x10, x100, and x1k multipliers
- Ferro-resonant line regulator for output voltage stabilization
- Guard/ground return circuit
- Automatic transit protected meters
- Rugged case with cushion grips
- Transit protected meters
* Due to the ferro-resonant designed input voltage regulator, if an inverter is used for the voltage source it must produce a “true sine wave” output and not a “modified sine wave” (square wave). This model is input frequency sensitive: either 50Hz or 60Hz but not both. Please Specify when ordering.
| Input: | 120V, 60Hz, 10A or 230V, 50/60Hz, 5A (±1% input voltage regulator)* |
| Output: | 0 – 75kVdc, 10mA, negative polarity, positive ground |
| Duty: | Continuous |
| Voltmeter: | 3.5″, scaled 0-37.5/75kVdc, ±2% FS accuracy |
| Currentmeter: | 3.5″, scaled 0-1.0µAdc, ±2% FS with multipliers x1, x10, x100, x1k, x10k |
| Guard/ground load return: | Yes |
| Megohmmeter: | Scaled 100 -1MΩ with multipliers of x0.1, x1, x10, x100, x1k |
| Controls | |
|---|---|
| Voltage output: | Continuously adjustable up to max. voltage |
| Safety | |
| Interlocks: | Zero start and external interface |
| Protection: | Surge and transient |
| Cable Length | |
|---|---|
| Output cable: | 6m shielded with alligator clamp |
| Ground lead: | 6m with alligator clamp |
| Return lead: | 6m with alligator clamp |
| Input line cord: | 3m |
| Ground stick: | 6m lead and clamp included |
| Size & Weight | |
| Controls: | 356mm w x 279mm d x 457mm h, 31kg |
| HV Tank: | Included in controls case |
